Tel
029-83460512 / 15349231350
Fuji ZKM Zirconia Oxygen Analyzer
The zirconia oxygen content analyzer is used to continuously measure the oxygen content in the combustion exhaust gas of industrial boilers, heating furnaces, cracking furnaces, incinerators, etc., through monitoring and control of the combustion process, so as to achieve energy saving and high efficiency, reduce environmental pollution and prolong furnace age purpose. The zirconia oxygen analysis we provide mainly includes three series of products: ordinary type, flameproof type and two-component zirconia oxygen analyzer according to different application occasions.
Products General Specifications：
Measuring object: Oxygen in noncombustible gas
Measuring method: Insertion type zirconia sensor
Measuring range: 0 TO 2....50 VOL%,two ranges,user configurable ( in 1 vol% o2 steps)
Repeatability: Within ±0.5% FS
Linearity： Within±2% FS
Response time: Within 4 to 7sec,for 90%(from calibra-tion gas inlet)
Warmup time:≥10 min
Analog Output：4 to 20mA DC
Power supply: Rated voltage: 100 to 120V AC , 200 to 240 V AC.
Ambient Temperature: Detector:-10 to + 60℃
IP rating: IP66,IP67
The zirconia oxygen content analyzer is used to continuously measure the oxygen content in the combustion exhaust gas of industrial boilers, heating furnaces, cracking furnaces, incinerators, etc., through monitoring and control of the combustion process, so as to achieve energy saving and high efficiency, reduce environmental pollution and prolong furnace age purpose. The zirconia oxygen analysis we provide mainly includes three series of products: ordinary type, flameproof type and two-component zirconia oxygen analyzer according to different application occasions.
Products General Specifications：
Measuring object: Oxygen in noncombustible gas
Measuring method: Insertion type zirconia sensor
Measuring range: 0 TO 2....50 VOL%,two ranges,user configurable ( in 1 vol% o2 steps)
Repeatability: Within ±0.5% FS
Linearity： Within±2% FS
Response time: Within 4 to 7sec,for 90%(from calibra-tion gas inlet)
Warmup time:≥10 min
Analog Output：4 to 20mA DC
Power supply: Rated voltage: 100 to 120V AC , 200 to 240 V AC.
Ambient Temperature: Detector:-10 to + 60℃
IP rating: IP66,IP67