Tel
029-83460512 / 15349231350
The SIPART PS2 electropneumatic positioner is used to control the final control element of pneumatic linear or part-turn actuators. The electropneumatic positioner moves the actuator to avalve position corresponding to the setpoint. Additional function inputs can be used to block the valve or to set a safety position. A binary input is present as standard in the basic device for this purpose.
Application：
The SIPART PS2 positioner is used, for example, in the following industries:
• Chemical/petrochemical
• Power stations
• Paper and glass
• Water, waste water
• Food and pharmaceuticals
• Offshore plants
The SIPART PS2 positioner can be used with all pneumatic actu
ators and is available for delivery:
• In various enclosure designs and various materials (polycar
bonate, aluminum, and stainless steel)
• For non-hazardous applications
• For hazardous applications in the versions
- Intrinsic safety type of protection
- Flameproof enclosure type of protection
- Non-sparking type of protection
- Type of protection dust explosion protection by enclosure
and in the versions:
• With 0/4 ... 20 mA control with/without communication through
HART signal
• With PROFIBUS PA communication interface
• With FOUNDATION Fieldbus (FF) communication interface
Explosion-proof versions
• Device with "intrinsic safety" type of protection for use in Zone
1, 2, 21, 22 or Class I, II, III/Division 1/Groups A-G
• Device with "dust explosion protection by enclosure" type of
protection for use in Zone 21, 22 or Class II, III/Division 1/
Groups E-G
• Device with "non-sparking" type of protection for use in Zone
2 or Class I, Division 2, Groups A-D
• Device with "flameproof enclosure" type of protection for use
in Zone 1 or Class I, Division 1, Groups A-D