The difference between Fuji pressure FKG transmitter and Fuji FKE liquid level transmitter
Among the many instruments in the industrial field, there are a type of instrument to detect data such as air pressure, density, capacity and other data in the sealing environment. In this type of instrument, it is commonly used Fuji FKG pressure transmitter and Fuji FKE level transmitter. What is the difference between these transmitter?
The Fuji FKE level transmitter is the extension and development of the FUJI FKG pressure transmitter. It is developed from the basis of the FUJI FKG pressure transmitter. It is a new variant of the FUJI FKG pressure transmitter in the field of detail professional.
Most people think there are only liquid level can measure liquid levels, but in fact, FUJI FKG pressure transmitters can also be used to measure liquid levels, because under the weight of the liquid medium, it will produce Different pressure values according to different depth liquid levels. , the linear change relationship between the pressure value and the liquid level can be used to convert the value of the liquid level by the pressure value of the liquid medium. Therefore The liquid level transmitter, the solution level transmitter of the single -law, and the dual flames uses the measurement pressure value to directly obtain the liquid level value.
In terms of use, the measurement medium of FUJI FKG pressure transmitters includes gas and liquid, while the FUJI FKE liquid level transmitter is measured only various liquid; in terms of use accuracy, the liquid measurement accuracy of the pressure transmitter is not accurate enough, mainly or mainly, mainly or The detection of the two mediums of vapor and water, while the liquid level transmitter can measure all density liquids. From water, oil to various chemical solutions that are prone to change and crystals, they have very good test accuracy.
Fuji FKC differential pressure transmitter is also a kind of pressure transmitter, mainly because the differential pressure of the measuring medium, that is, the two pressures are transmitted into the high and low pressure room, which is performed by blocking the pads and the filling liquid in the component. Send to both sides of the measured membrane. It is a kind of stress variable. After the sensing transformation, the pressure change volume is converted into a specified output signal on the appearance.
It is made from the three three of the sensor (also known as the pressure sensor), the measurement circuit and the process connector. It can transform the physical pressure parameters such as the gas and liquid of the pressure measurement component sensor into Supply indicator alarm, recorder, conditioner and other second appearances for measurement, instructions and process conditioning. Connect the pressure transmitter with the input terminal of the measurement specification, and the current output terminal is connected to the combination of the numeric multi -purpose table with the numeric multi -usage table. The pressure difference can be converted to a liquid level signal for measurement of liquid level value.
The two instruments actually use the same principle. The test results are similar. Both are returned by the current signal to the various data conditions of the tested body, such as the height of the liquid level, the size of the hydraulic pressure, the density size, etc., but in the style, in the style On the top, the change of the Fuji FKE liquid level transmitter is more abundant. It has nearly ten categories, dozens of different types of different types of transmitter types, and Fuji FKG pressure transmitters are relatively small. Usually There are only some details and size.
