Installation of Fuji Differential Pressure Transmitter
Precautions
Ambient air conditions at the installation site
Please avoid installing the Fuji FKC transmitter in a corrosive environment. If it is used in a corrosive environment, it should be well ventilated and pay attention to avoid corrosive gas or liquid from immersing in the wire pipe.
A reference to the installation location
All Fuji Fkc differential pressure transmitters have strict requirements on the installation position. When there is a tilt installation requirement, it needs to be additionally put forward when ordering, and the zero point setting can also be reset after installation.
Installation site shock and vibration
Fuji Fkc intelligent differential pressure transmitter and pressure transmitter are designed to withstand certain shock and vibration at the factory. However, it should also be installed in a place with no or little vibration as much as possible.
Installation site temperature conditions
Please try to avoid installing the Fuji Fkc transmitter in a place where the ambient temperature changes greatly. If the installation location is directly exposed to heat radiation or exposed to the sun and rain, waterproof, heat insulation radiation and ventilation measures should be taken.
