How is the Fuji transmitter connected to the Fuji inverter? Which two terminals are connected? How to set parameters?
Method one: Fuji transmitter power supply wiring, the transmitter power supply has AC and DC, AC is divided into 220V and 110V, DC is divided into fixed voltage and wide voltage, fixed voltage such as 5V, 10V, 12V, 24V and other fixed voltage voltage to select the power supply must be in accordance with the nominal voltage. Wide voltage such as 3-36V 5-24V such as nominal, power supply selection in this range can be, wiring attention to the voltage level, DC power supply positive and negative poles do not connect wrong.
Method 2: Fuji transmitter excitation end (sensor signal input end) wiring, general pressure sensors will have E+ S+ S-GND VCC and other E+ generally only the positive electrode of the sensor power supply, GND is negative, S+ S- represents the positive and negative sensor signal input. Sensors are bought with the definition of the corresponding color line according to the definition of access to the transmitter.
Method 3: Fuji transmitter is divided into two-wire system and three-wire system. One end of the two-wire system is power supply, such as 5V, and the other end is 0-5V output. The two-wire system can be three-wire system when the secondary equipment is connected to 0-5V, in which two wires are power cables and the other one is analog output.
Method 4: Fuji transmitter signal output terminal wiring, generally divided into 0-5v 4-20mA 0-10V, generally there will be a common terminal label for GND or COM, we choose a 0-5v 4-20mA 0-10V according to the type of secondary equipment when wiring, the other one is selected as the public terminal. Connect these two cables to the secondary equipment.
